Mercedes-benz Ntg2.5 Comand Download
Posted By admin On 08/11/19An owner may confuse the early COMAND 2.5 that was installed on models such as the S Class W220 with COMAND APS NTG2.5. COMAND APS NTG2.5 is a version of the new generation COMAND APS. A key difference is that the COMAND APS uses MOST instead of the early D2B optical system. Looking for Mercedes-Benz Comand APS NTG2.5 Europe 2016/2017. 3 Tue Sep 12, 2017 7:48 pm. Looking for Mercedes-Benz Comand APS NTG4-212 Europe 2014 A. 5 Sun Jun 25, 2017 12:30 pm. Mercedes Benz Comand NTG 4.5 Online map Europe V.10. 4 Thu Jun 01, 2017 8:11 am. Mercedes Comand APS NTG4 (204) V10. View and Download Mercedes-Benz COMAND supplement manual online. COMAND Car Video System pdf manual download. 2018 2019 android audi bmw card change connect dvd east europe file files firmware garmin gps here igo live map maps maxsea mercedes multi nav nav+ navigation navigator navitel nextgen nuvi offline peugeot pongo primo problem rns road route rt6 skin smeg smeg+ smeg+iv2 software speed speedcam sygic system time tomtom truck update version west. FAQ for Comand APS NTG2.5 (Hard Disk version) from Model Year 2009 on A/B/CLC/ML/GL/R and MY2010 on Sprinter/Viano/Vito. This site is in no way affiliated with Daimler / Mercedes-Benz, all trademarks referenced belong to the trademark holder. Nov 09, 2019 Mercedes COMAND Online NTG 5.5 ( 2015-2016 ) update. Speedcam for your maps. Download update. Free custom download. All updates for fixed and mobile speed cameras, every day, for all GPS devices.
110-17-2016, 02:59 AM (This post was last modified: 03-27-2019, 03:44 PM by webmaster.)
Mercedes-benz Ntg 2.5 Command Download Free
Hy M8
I need help please.
I like to update a NTG2.5 with the current Firmware 09/29
171 827 4159-0001
Already installed Firmware version: 09/02
Hardware:171 870 759 4001
Software: Version 4.1 / NTG2.5eu-Vol4.1
I do have a Image from the Firmware cd above.
I burned it with Img Burn.
Unfortunately the NTG2.5 cant read it????
If I run the Engineering Mode I found a possibility to run a Softwareupdate but it stucked! It shows me : Insert the cd 171 827 4759-0001 and nothing happend. Only one button shows up --> Abort
Is anybody out there who can help me please
Thanks Spark
I need help please.
I like to update a NTG2.5 with the current Firmware 09/29
171 827 4159-0001
Already installed Firmware version: 09/02
Hardware:171 870 759 4001
Software: Version 4.1 / NTG2.5eu-Vol4.1
I do have a Image from the Firmware cd above.
I burned it with Img Burn.
Unfortunately the NTG2.5 cant read it????
If I run the Engineering Mode I found a possibility to run a Softwareupdate but it stucked! It shows me : Insert the cd 171 827 4759-0001 and nothing happend. Only one button shows up --> Abort
Is anybody out there who can help me please
Thanks Spark
Mercedes Benz Comand Manual
TV-Free Video-in-motion Interface
TF-NTG2
compatible with Mercedes Benz Comand APS NTG2, NTG2.5, NTG4-204, NTG4-212 and Comand Online NTG4.5 navigation systems
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded.
Version 30.09.2014
TF-NTG2
Contents 1. Prior to installation 1.1. 1.2. 1.3. 1.3.1.1. 1.4.
Delivery contents Check compatibility of vehicle and accessories Setting the Dip-switches of the CAN-Box TV-500 Exception: Vehicles with Comand Online NTG4.5 Pin-assignments
2. Installation 3. Activation of the video-in-motion function 4. Specifications 5. Technical support
1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.
1.1.
Delivery contents Take down the SW-version and HW-version of the interface-boxes, and store this manual for support purposes! Harness TV-NTG2
Page
1
CAN-box TV-500 HW_____ SW_____
Version 30.09.2014
TF-NTG2
1.2.
Check compatibility of vehicle and accessories
Requirements brand
Mercedes Benz
VW
compatible vehicles A-Class (W169) from 09/2004 til 06/2008, BClass (W245) from 09/2004 til 06/2008, C-Class (W203) from 04/2004 til 02/2007, CLC-Class (CL203) from 06/2008 til 09/2008, CLK-Class (C209 W209) from 06/2004, G-Modell (G463) from 04/2007 til 08/2008, GL-Class (X164) til 06/2008, ML-Class (W164) til 06/2008, R-Class (W251) til 06/2008, Sprinter, Viano A-Class (W169) from 07/2008, B-Class (W245) from 07/2008 til 10/2011, CLS-Coupe (W219) from 04/2008 til 12/2010, E-Class (W211) from 06/2008 til 03/2009, G-Modell (G463) from 09/2008, GL-Class (X164) from 07/2008, MLClass (W164) from 07/2008 til 10/2011, R-Class (W251) from 07/2008, SL-Class (R230) from 04/2008, SLK-Class (R171) from 04/2008 til 02/2011, Viano C-Class (W204) from 03/2007 til 02/2011, CLCClass (CL203) from 09/2008, GLK-Class (X204) from 09/2008, SLS (C197) from 03/2010 E-Class (W212) from 04/2009 til 05/2011, EClass Coupe (W207) from 05/2009 til 05/2011, CLS-Coupe (C218) from 01/2011 til 05/2011 B-Class (W246) from 11/2011, C-Class (W204) from 03/2011, C-Class Coupe (C204) from 06/2011, E-Class (W212) from 06/2011, E-Class Coupe (C207) from 06/2011, CLS-Coupe (C218) from 06/2011, GLK-Class (W204) from 01/2011, ML-Class (W166) from 11/2011, SLK-Class (R172) from 03/2011, SL-Class (R231) from 2012 Crafter
navigation system
Comand APS NTG2
Comand APS NTG2.5
Comand APS NTG4-204
Comand APS NTG4-212
Comand Online NTG4.5
Comand APS NTG2
Limitations While the video-in-motion function is active, the navigation will not work!
Comand Online NTG4.5
On some vehicles the navigation will not work while the videoin-motion function is active. This can only be detected by a test drive with built-in TV-free!
Page
2
Comand APS NTG2.5
Version 30.09.2014
TF-NTG2
1.3.
Setting the Dip-switches of the Can-Box TV-500 Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Vehicles with NTG2/NTG4-xxx* ON OFF OFF OFF OFF OFF Vehicles with NTG2.5 OFF OFF OFF OFF OFF OFF
* With dip1 to OFF on vehicles with NTG2/NTG4-xxx the included green cable is used to activate the video-in-motion function. Note: Dip switch functions of the TV-500 Dip 1 – activation TV-free Dip 2 – no function Dip 3 – no function Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side
1.3.1. Exception: Vehicles with Comand Online NTG4.5 On some vehicles with Comand Online NTG4.5 the navigation performance is affected as long as the video-in-motion function is activated. This can only be detected by a test drive with built-in TV-free with Dip 1 to ON! If the navigation performance is affected you have to set Dip 1 to OFF. As long as the videoin-motion function is activated, the navigation will NOT be working! You can activate and deactivate the video-in-motion function by pressing a button (see chaper “Activation of the video-in-motion function”). Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 NTG4.5 with TV-free pemanent ON OFF OFF OFF OFF OFF NTG4.5 with TV-free selective OFF OFF OFF OFF OFF OFF (hang-up button)
Page
3
Note: It is possible to install the TV-free on vehicles with Comand Online NTG4.5 with selective activation generally.
Version 30.09.2014
TF-NTG2
1.4.
Pin-assignments
Pin-assignment vehicle connector Cable colour ●● Red/Blue ● Brown ●● Brown/Red ● Brown
Assignment +12Volt Permanent 15 Ground Pin 12 CAN HIGH Pin 11 CAN LOW Pin 9
Pin-assignment of the CAN-Box TV-500 (Molex 8pin) Cable colour ● Yellow ● Blue ●● Yellow/Black ●● Blue/Black ● Red ● Black ● Green
Pin-No. Pin 4 Pin 3 Pin 8 Pin 7 Pin 1 Pin 5 Pin 6
●
Pin 2
Page
4
White
Assignment CAN-HIGH – connection to the head-unit CAN-LOW – connection to the head-unit CAN-HIGH – connection to the vehicle CAN-LOW – connection to the vehicle +12V permanent Ground Activation of the video-in-motion function (+12V = TV-free activated) Trigger output (+12V DC 500mA)
Version 30.09.2014
TF-NTG2
2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.
Instruction for vehicles with NTG2:
1. Remove all covers of the navigation computer. 2. Remove the 4 screws of the navigation computer and pull it out. 3. RemoveQuadlock connector from the navigation computer and connect it to Harness TV-NTG2.
NTG2
4. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Instruction for vehicles with NTG2.5:
1. Remove the navigation computer from the centre console. 2. RemoveQuadlock connector from the navigation computer and connect it to Harness TV-NTG2. NTG2.5
Page
5
3. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Version 30.09.2014
TF-NTG2
Instructions for vehicles with NTG4-2xx (NTG4.5 similar):
1. Remove the centre air nozzle unit with the accordant tool kit.
2. Remove both TORX-screws.
3. Slide upward the interlock behind the removed TORX screws and pull out the navigation computer. (In the right picture the interlock is closed!)
….In this picture the interlock is open.
4. Remove Quadlock connector from the navigation computer and connect it to Harness TV-NTG2.
Page
6
5. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Version 30.09.2014
TF-NTG2
3. Activation of the video-in-motion function On vehicles with Comand APS NTG2/NTG4-2xx and on some vehicles with Comand Online NTG4.5 the video-in-motion function is activated permanently without disturbing the navigation performance. On vehicles with Comand APS NTG2/NTG4-2xx the video-in-motion can be activated and deactivated by Dip 1 or alternatively by the included loose green cable in connection with a switch (not included in delivery). Video-in-motion permanent With dip1 to ON the video-in-motion function is activated permanently without disturbing the navigation performance. Video-in-motion selective With dip1 to OFF the included green cable is used to activate the video-in-motion function. Connect a switch to the green cable and connect the green cable to +12V ACC. ● +12V = TV-Free is activated ● 0V = TV-Free is not activated Note: The loose white cable is not required and must be isolated.
On vehicles with Comand APS NTG2.5 and on some vehicles with Comand Online NTG4.5 select the “navigation mode” on the instrument and press the “hang-up”-button on the steering-wheel for more than 3 seconds to activate/deactivate the video-in-motion function. When the ignition is off, the video-in-motion interface will be automatically disabled.
Page
7
Note: As long as the video-in-motion function is activated, the navigation of the command will NOT be working! The loose white and green cable are not required and must be isolated.
Version 30.09.2014
TF-NTG2
4. Specifications Operation voltage 10.5 – 14.8V Stand-by power drain
TF-NTG2
compatible with Mercedes Benz Comand APS NTG2, NTG2.5, NTG4-204, NTG4-212 and Comand Online NTG4.5 navigation systems
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded.
Version 30.09.2014
TF-NTG2
Contents 1. Prior to installation 1.1. 1.2. 1.3. 1.3.1.1. 1.4.
Delivery contents Check compatibility of vehicle and accessories Setting the Dip-switches of the CAN-Box TV-500 Exception: Vehicles with Comand Online NTG4.5 Pin-assignments
2. Installation 3. Activation of the video-in-motion function 4. Specifications 5. Technical support
1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources.
1.1.
Delivery contents Take down the SW-version and HW-version of the interface-boxes, and store this manual for support purposes! Harness TV-NTG2
Page
1
CAN-box TV-500 HW_____ SW_____
Version 30.09.2014
TF-NTG2
1.2.
Check compatibility of vehicle and accessories
Requirements brand
Mercedes Benz
VW
compatible vehicles A-Class (W169) from 09/2004 til 06/2008, BClass (W245) from 09/2004 til 06/2008, C-Class (W203) from 04/2004 til 02/2007, CLC-Class (CL203) from 06/2008 til 09/2008, CLK-Class (C209 W209) from 06/2004, G-Modell (G463) from 04/2007 til 08/2008, GL-Class (X164) til 06/2008, ML-Class (W164) til 06/2008, R-Class (W251) til 06/2008, Sprinter, Viano A-Class (W169) from 07/2008, B-Class (W245) from 07/2008 til 10/2011, CLS-Coupe (W219) from 04/2008 til 12/2010, E-Class (W211) from 06/2008 til 03/2009, G-Modell (G463) from 09/2008, GL-Class (X164) from 07/2008, MLClass (W164) from 07/2008 til 10/2011, R-Class (W251) from 07/2008, SL-Class (R230) from 04/2008, SLK-Class (R171) from 04/2008 til 02/2011, Viano C-Class (W204) from 03/2007 til 02/2011, CLCClass (CL203) from 09/2008, GLK-Class (X204) from 09/2008, SLS (C197) from 03/2010 E-Class (W212) from 04/2009 til 05/2011, EClass Coupe (W207) from 05/2009 til 05/2011, CLS-Coupe (C218) from 01/2011 til 05/2011 B-Class (W246) from 11/2011, C-Class (W204) from 03/2011, C-Class Coupe (C204) from 06/2011, E-Class (W212) from 06/2011, E-Class Coupe (C207) from 06/2011, CLS-Coupe (C218) from 06/2011, GLK-Class (W204) from 01/2011, ML-Class (W166) from 11/2011, SLK-Class (R172) from 03/2011, SL-Class (R231) from 2012 Crafter
navigation system
Comand APS NTG2
Comand APS NTG2.5
Comand APS NTG4-204
Comand APS NTG4-212
Comand Online NTG4.5
Comand APS NTG2
Limitations While the video-in-motion function is active, the navigation will not work!
Comand Online NTG4.5
On some vehicles the navigation will not work while the videoin-motion function is active. This can only be detected by a test drive with built-in TV-free!
Page
2
Comand APS NTG2.5
Version 30.09.2014
TF-NTG2
1.3.
Setting the Dip-switches of the Can-Box TV-500 Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 Vehicles with NTG2/NTG4-xxx* ON OFF OFF OFF OFF OFF Vehicles with NTG2.5 OFF OFF OFF OFF OFF OFF
* With dip1 to OFF on vehicles with NTG2/NTG4-xxx the included green cable is used to activate the video-in-motion function. Note: Dip switch functions of the TV-500 Dip 1 – activation TV-free Dip 2 – no function Dip 3 – no function Dip 4 – no function Dip 5 – CAN-bus termination resistor on the vehicle side Dip 6 – CAN-bus termination resistor on the head-unit side
1.3.1. Exception: Vehicles with Comand Online NTG4.5 On some vehicles with Comand Online NTG4.5 the navigation performance is affected as long as the video-in-motion function is activated. This can only be detected by a test drive with built-in TV-free with Dip 1 to ON! If the navigation performance is affected you have to set Dip 1 to OFF. As long as the videoin-motion function is activated, the navigation will NOT be working! You can activate and deactivate the video-in-motion function by pressing a button (see chaper “Activation of the video-in-motion function”). Vehicle/ navigation Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6 NTG4.5 with TV-free pemanent ON OFF OFF OFF OFF OFF NTG4.5 with TV-free selective OFF OFF OFF OFF OFF OFF (hang-up button)
Page
3
Note: It is possible to install the TV-free on vehicles with Comand Online NTG4.5 with selective activation generally.
Version 30.09.2014
TF-NTG2
1.4.
Pin-assignments
Pin-assignment vehicle connector Cable colour ●● Red/Blue ● Brown ●● Brown/Red ● Brown
Assignment +12Volt Permanent 15 Ground Pin 12 CAN HIGH Pin 11 CAN LOW Pin 9
Pin-assignment of the CAN-Box TV-500 (Molex 8pin) Cable colour ● Yellow ● Blue ●● Yellow/Black ●● Blue/Black ● Red ● Black ● Green
Pin-No. Pin 4 Pin 3 Pin 8 Pin 7 Pin 1 Pin 5 Pin 6
●
Pin 2
Page
4
White
Assignment CAN-HIGH – connection to the head-unit CAN-LOW – connection to the head-unit CAN-HIGH – connection to the vehicle CAN-LOW – connection to the vehicle +12V permanent Ground Activation of the video-in-motion function (+12V = TV-free activated) Trigger output (+12V DC 500mA)
Version 30.09.2014
TF-NTG2
2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle is sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.
Instruction for vehicles with NTG2:
1. Remove all covers of the navigation computer. 2. Remove the 4 screws of the navigation computer and pull it out. 3. RemoveQuadlock connector from the navigation computer and connect it to Harness TV-NTG2.
NTG2
4. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Instruction for vehicles with NTG2.5:
1. Remove the navigation computer from the centre console. 2. RemoveQuadlock connector from the navigation computer and connect it to Harness TV-NTG2. NTG2.5
Page
5
3. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Version 30.09.2014
TF-NTG2
Instructions for vehicles with NTG4-2xx (NTG4.5 similar):
1. Remove the centre air nozzle unit with the accordant tool kit.
2. Remove both TORX-screws.
3. Slide upward the interlock behind the removed TORX screws and pull out the navigation computer. (In the right picture the interlock is closed!)
….In this picture the interlock is open.
4. Remove Quadlock connector from the navigation computer and connect it to Harness TV-NTG2.
Page
6
5. Remove the both 12pin inserts from the original Quadlock connector and connect them together with the optical leads to the Harness TV-NTG2. Connect the TV-NTG2 to the navigation computer.
Version 30.09.2014
TF-NTG2
3. Activation of the video-in-motion function On vehicles with Comand APS NTG2/NTG4-2xx and on some vehicles with Comand Online NTG4.5 the video-in-motion function is activated permanently without disturbing the navigation performance. On vehicles with Comand APS NTG2/NTG4-2xx the video-in-motion can be activated and deactivated by Dip 1 or alternatively by the included loose green cable in connection with a switch (not included in delivery). Video-in-motion permanent With dip1 to ON the video-in-motion function is activated permanently without disturbing the navigation performance. Video-in-motion selective With dip1 to OFF the included green cable is used to activate the video-in-motion function. Connect a switch to the green cable and connect the green cable to +12V ACC. ● +12V = TV-Free is activated ● 0V = TV-Free is not activated Note: The loose white cable is not required and must be isolated.
On vehicles with Comand APS NTG2.5 and on some vehicles with Comand Online NTG4.5 select the “navigation mode” on the instrument and press the “hang-up”-button on the steering-wheel for more than 3 seconds to activate/deactivate the video-in-motion function. When the ignition is off, the video-in-motion interface will be automatically disabled.
Page
7
Note: As long as the video-in-motion function is activated, the navigation of the command will NOT be working! The loose white and green cable are not required and must be isolated.
Version 30.09.2014
TF-NTG2
4. Specifications Operation voltage 10.5 – 14.8V Stand-by power drain