Bmw Dcan Driver Download

Posted By admin On 10/10/19

If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it.

  1. K Dcan Utility 2 0 Download
  2. Inpa K Dcan Cable Driver Download
  3. Bmw Inpa K+dcan Download

Sep 08, 2015  If your cheap BMW INPA K+DCAN USB interface with FTDI chip failed to install drivers or the system prompt cannot locate the drivers. Here is a little write-up on how to fix it. Disclaimer: I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk. Philips introduced its 276E7QDSB/11 product, which is a 27-inch display, covering 104.4% of the NTSC colour gamut. The specialty from Philips features the 1920 × 1080 resolution (Full HD), 250 cd/m2 brightness and 5 ms (GtG) response time.

Jun 21, 2011  Diagnostics, coding, programming, repair BMW vehicles. BMWelcome BMW coding and programming BMW GT1, OPS/OPPS, INPA BMW INPA Ediabas installation guide +. Sep 13, 2017  BMW INPA software new update, BMW INPA Cable with BMW INPA Software for BMW E serial programming.here eobdtool.com share full BMW INPA software 5.0.6 download BMW INPA software for F and E series models. BMW INPA Software 5.0.6 do not test, pls try it for INPA cable by your own risk. BMW INPA Software Download Free: BMW Standard Tools and INPA.

Disclaimer:
I am using Windows 8.1 system. No sure if it works on yours. You are on your own risk.

Dec 26, 2015  In this article you can free download BMW INPA (last version, includes NCSExpert and WinKFP).And I will show you how to setup Bmw inpa software steps by steps.

Pre-installation caution:
Here are the INPA driver & software free download links. If the driver/software is working, then ignore the next part. Otherwise take a look at the following part for reference.
INPA Driver: http://www.obd2vip.com/download/inpa-driver.zip（Close antivirus software or set your browser to download success）
INPA software: http://www.obd2vip.com/download/inpa-2.zip

Procedure:

1. Open your Device Manager. Control Panel–Hardware & Sound–Device Manager.
2. Connect the INPA K+DCAN cable with computer/PC-Double click
3. Locate USB Serial Converter->DetailsDropdown Menu->Hardware IDs. The PID number is the one you want. Will most likely be 0000.
4. Download CDM v2.08.30
http://www.ftdichip.com/Drivers/CDM/CDM%20v2.08.30%20for%20Windows%208.1.zip

5. Disable “Driver signature verification” Settings–Change PC Settings–Recovery–Advanced Startup–Restart.
This will restart your PC to Advanced settings. From there: Troubleshoot–Advanced Options–Startup Settings–Restart–F7

Follow these picture guides:
Your PC will then restart with signature verification disabled. You are now able to edit the INPA drivers.

6. Unzip the Drivers file that you just downloaded and open up

7. Open ftdibus.inf
8. Replace every PID_6001 with PID_0000 to match your hardware ID. Scan through the whole document. Then save it.
9. Then find ftdiport.inf. Do the same to ftdiport.inf

10. Back in your Device Manager double click on your OBDII cable again.
Locate USB Serial Convertor Properties->Driver->Update Driver-> Browse my computer.
Locate your driver and install. You will need to install it for both USB Serial Converter and Ports & COM.

11. Setup INPA cable as normal and run INPA software.

It seems that the white FTDI chip INPA cables have to be manually put into D-CAN mode. This file will take care of that. It is normal for the LED to go out.
http://www.mediafire.com/download/35fnrnd3q3dvf3w/D-CAN.exe
If you put the cable into DCAN mode, the LED goes off, and it says there is no adapter connected. Please connect it to the car and run the DCAN mode.

Who Viewed This Article Also Views:

BMW INPA Software is factory BMW diagnostics software that connects to all the systems and modules on BMW cars not just engine like generic scanners, it reads all BMW trouble codes and gives live diagnostics and data and GUI pages and test functions…

In this article include:INPA ediabas 6.4.7 donload,INPA ediabas 5.02 download,INPA 5.0.6 ediabas downloadINPA 6.4.3 ediabas download,BMW INPA 5.02 and Ediabas 6.4.7 download,all of the can work with BMW INPA K+CAN Cable.

INPA Latest version Diagnostic Software Function List:

Support of all ECU use cases in Engineering, Test, Production and After Sales

* Specification of ECU’s diagnostic data

* Reading and clearing error memory

* FLASH data uploading and downloading

* Reading measurement value

* Input/output control

*Calibration of single ECU variables

* Coding of ECU variables

* CAN (controller Area Network) bus mode emulation

* Integrated solutions for on-board/off-board

* Fast and simple configuration of GUI and communication data instead of programming

*Customer specific protocols supported

* Long term application by supporting widespread ASAM standards

* Language is English and German

BMW INPA Software Coverage Vehicle List:

1 series E87

3 series E30 E36 E46 E90

5 series E34 E39 E60 E61

6 series E63 E64

7 series E32 E38 E65 E66

8 series E31 E52

Mini R50 R52 R53

X series E53 E83

Nikon d3300 manual pdf download. Rolls Royce

Z series E85 E52.

BMW INPA Software Free Download:

Below list the free download link collect form internet,if you find the link is invalid,pls tell me.

INPA 6.4.3 Full.rar (thegrayshadow.com)

INPA 6.4.3 Full.rar (mediafire.com)

INPA Ediabas 6.4.3(MEGA)

INPA Software (mediafire.com)

INPA 5.0.6 rar (thegrayshadow.com)

INPA ediabas 5.02 download (tested work 100% ok)

BMW INPA E46:

K Dcan Utility 2 0 Download

This part share some BMW INPA work case on BMW E46 show as below:

BMW INPA E60:

This part include some content about BMW INPA software or cable working cases on BMW E60

BMW INPA Reset BMW E60 Airbag Waring Light

How to Reset & Relearn E60 BMW Automatic Transmission with INPA

BMW E60 Coding by INPA and NCS Expert Cable

For more about BMW INPA E60,please check:BMW INPA E60 Coding/Diagnose Guide

BMW INPA Win7 Installation Guide

BMW INPA Win8 Installation Guide

BMW INPA Win10 Installation Guide

Win7 Win8 Win10 Installation please check this article:

Notice of using INPA***

1.Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don’t charge the battery while diagnosing (the charger may interfere with diagnosis). Before charging, discharge the battery. You may knock down the battery and connect the power line during long time diagnosing. To make sure the battery life. 2***65289; While testing, make sure the diagnostic lines well connected.
3.Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4.After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5.Don’t cut the power or connector during test.
Don’t touch the high temperature components in carriage during test.

If you find the download link is invaild,click to download:BMW Standard Tools 2.12 Free Download

include:

EDIABAS: 7.3.0 1.1

-Tool32 4.0.3

-CANdriver 2.5.0.0

WINKFP 5.3.1

– CoAPI 3.13.2

Inpa K Dcan Cable Driver Download

NFS 5.2.9

– KMM SRV 4.31.1.0

INPA 5.0.6

NCS Expert 4.0.1

BMW INPA Win7 Installation Guide:

1. Setup/Configure your OBD2 USB Cable

  1. Plug in the cable into a USB port on your computer, you must ONLY use this USB port from here-on for this cable. If your computer is connected to the internet it should automatically search and install in the USB cable drivers. If your computer does NOT automatically detect the cable, you may need to use ‘Device Manager’ to manually update/select the driver.
  2. Once installed, go to Control Panel -> System -> Then click on the Hardware tab, then click on Device Manager.
  3. Locate the entry ‘USB Serial Port’ in the ‘Ports’ section of Device Manager. It should read ‘USB Serial Port (COMX)’.
  4. Right-click on the above and select ‘Properties’, then click on the ‘Port Settings’ Tab and then click on ‘Advanced’.
  5. Change the ‘Com Port Number’ entry to ‘COM1’.
  6. Change the ‘Latency Timer (msec)’ to ‘1’.
  7. Click on ‘OK’ and close all the windows, restart your PC to confirm all the changes.

2. Install INPA/EDIABAS 6.4.3 and 4.4.7

  1. Extract the contents of the downloaded file ‘INPA-6.4.3-full.rar’ and you’ll find a .NRG file. This is a CD image that you’ll need to either burn to a CD or extract to a folder using a tool such as ISOBuster.
  2. Once extracted, go into the following folder ‘/REFERENZ/INSTALL/’, right-click on ‘INSTPROG.exe’ and select ‘Properties’, click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’, then double-click the file to run the installation.
  3. Select ‘English’ as the language and click ‘Next’.
  4. Select ‘Next’ until asked for ‘Configuration’, scroll to ‘BMW Group Rectification Programs UK’, click ‘Next’.
  5. Tick the option ‘Complete’ for all of the options shown.
  6. Select ‘Next’ and allow the installation to start.
  7. After a minute or so, installation will complete, close the Window.

3. Verify environment variables

  1. Go into Control Panel -> System -> Advanced System Settings.
  2. Select ‘Environment Variables’ and then verify that the System Variables ‘TMP’ and ‘TEMP’ both contain the path ‘C:EDIABASBin’ within the ‘Value’ string – for instance “C:WindowsTemp;C:EDIABASBin”.

4. Prepare Installation Files

Bmw Inpa K+dcan Download

  1. Extract the contents of the downloaded file ‘INPA_502_Updated.rar’.
  2. You’ll use the contents of this archive during the next three steps.

5. Install BMW Tools

  1. From the above extracted file set, find the file ‘Step 1_ Install BMW Tools.exe’, right-click on it and select ‘Properties’.
  2. Click on the Compatibility tab and change the dropdown to Windows XP SP3 as the Compatibility Mode, also tick ‘Run As Administrator’, then click ‘Ok’
  3. Double-click on the above file to start the installation.
  4. Set the Destination Path C:BMW Tools (Don’t change this path) -> ‘Install’ -> ‘OK’.
  5. Select ‘English’ -> ‘Continue’ -> ‘Continue’.
  6. Select ‘C:’ -> ‘Continue’.
  7. Select ‘Skip’ -> ‘Next’
  8. Accept the defaults for programs to update, then click ‘Next’.
  9. Select ‘Com1’, ‘OBD’ and ‘USB to Serial Adapter’ -> ‘Continue’ -> ‘Continue’.
  10. The installation will begin and complete.

6. Install INPA/EDIABAS 6.4.7 and 5.0.2

  1. From the above extracted file set, double-click the file ‘Step 2_ Install INPA.exe’.
  2. The Destination Path should be ‘C:temp’, leave as it is and click ‘Next’.
  3. Choose ‘English’ and select ‘Continue’ and ‘Continue’.
  4. Select ‘C:’ and then ‘Continue’.
  5. Select ‘BMW Group Rectification Programs UK’ and click ‘Continue’.
  6. Tick ‘Update’ for all options where not grayed out, then ‘Continue’.
  7. Select ‘OBD’, then ‘Continue’ and ‘Continue’.
  8. The installation will begin and complete.

7. Install OBD Setup

  1. From the above extracted file set, double-click the file ‘Step 3_Final Update.exe’.
  2. The Destination Path should be left as it is, then select ‘Install’.
  3. Select ‘Yes to all’.
  4. Once completed, the window will close itself.

8. Complete Installation

  1. From the above extracted file set, double-click the file ‘serial port.reg’.
  2. When prompted, select ‘Yes’ and ‘Yes’. You will receive confirmation that your registry has been updated.
  3. Locate the file ‘C:EDIABASBinobd.ini’ and copy this file into your Windows folder.
  4. Edit the file ‘C:EC-APPSINPACFGDATINPA.INI’ in Notepad, locate the section that starts with ‘//F3’, remove the slashes at the beginning of the three lines of text, and amend any instance of ‘F10’ to ‘E46’.

Check more details about BMW INPA Software Installation on Win7 Win8 Win10

FromAuto Repair Technician Home, postBMW INPA 6.4.7 6.4.3 Software Free Download

Readers who read this article also read: